Agrivoltaic
Mounting Systems.
Procurement coordination for solar and agrivoltaic steel mounting systems. Confirm site exposure, loads and corrosion protection, including Magnelis® ZM310 where suitable, with the designer and selected fabricator.
Elevated PV structure
Axonometric conceptA raised fixed-tilt array with braced supports. Row spacing and clearances are coordinated with crops and agricultural access.
- 1 · PV module field
- 2 · Support and bracing
- 3 · Driven support concept
- a · Support spacing; h · Indicative clearance
Concept illustration. Not for fabrication. Dimensions and connections require project-specific design.
Steelwork for Solar Layouts.
Ground-mounted solar and dual-use agrivoltaic projects require coordinated structural and electrical interfaces. The designer and selected fabricator confirm geometry, coating and assembly scope before award.
Single-Axis Trackers
Torque tubes and bearing interfaces for tracking systems are specified to the tracker design. Circularity, machining tolerances and drive compatibility require agreed inspection criteria.
Fixed Tilt Arrays
Fixed structures may use 2-portrait or 4-landscape layouts where specified. Hole patterns, module interfaces and assembly sequence are checked against the approved system design.
Solar Carports
Y- or V-frame steel canopies for parking areas. Cable routes and EV-charging interfaces are coordinated separately with the relevant equipment and electrical design.
Elevated Agrivoltaics
Elevated arrays require clearances and row spacing matched to crops, tractors and harvesting equipment. Wind actions, foundations and exposure-related coating requirements are verified for each site.
Terrain Data & Foundation Scope.
Provide topographic surveys and relevant project outputs from PVsyst to the responsible designer. Pile lengths, terrain limits and foundation details are checked against the selected mounting system and geotechnical data.
- ✓ Terrain slopes checked against system design limits
- ✓ Generation of "BOM" lists by rows and zones (Block Design)
- ✓ Pull-out and lateral testing specified for the ground conditions
- 1 · Edge lip
- 2 · Mounting slots in the web
- 3 · Profile section
- b · Flange width; h · Section depth; A–A · Section
Project Evidence for Solar Steelwork.
Request material, coating and execution evidence from the selected fabricator for the agreed scope. Check manufacturer guidance for the site exposure; material branding or an environmental certificate does not establish unconditional corrosion performance.
Mediterranean "Solar Belt" Supply Chain.
Solar mounting deliveries require packing and vehicle selection matched to component dimensions and payload limits. Confirm loading plans, route restrictions and carrier capacity before dispatch.
Delivery planning
Example corridors- ValenciaESRoad corridor
- NapoliITRoad corridor
- AthensGRRoad corridor
Schematic connections, not a geographic map. Route, permits and delivery windows are agreed for each project.
Nesting & Palletizing
Where profile geometry permits, nesting C or sigma sections can improve load use. Confirm vehicle payload, axle limits, load securing and coating protection with the carrier; transport costs depend on the agreed route and packing plan.
Block-by-Block Delivery
Agree deliveries by field block or construction sequence with the fabricator, carrier and site team. Unloading resources, storage areas and schedule changes must be coordinated before dispatch.
Engineering Knowledge Base.
Key information for EPC contractors and solar park designers.
Request a Quote.
Initiate Project.
- 1 · PV module field
- 2 · Support and bracing
- 3 · Driven support concept
- a · Support spacing; h · Indicative clearance
- Structure
- Agrivoltaic Mounts
- Estimated quantity
- 100 t
Final geometry, structural design and fabrication details are defined from your project documentation.
Project requirements
Related procurement guides
Solar Mounting Steel: the €/MWp Buyer’s Guide (Fixed, Tracker, Agri-PV)
Agrivoltaics 2026: Steel Structures Powering the EU Green Deal
CBAM Guide 2026: What Every Procurement Engineer Must Know
Related Capabilities
A question is not a commitment. Ask us anything.
Not ready for a full RFQ? Send a plain question instead — specification, execution class, lead time, a second opinion on a quote you already have. Our team will review your enquiry.